8,968
edits
Changes
no edit summary
#Open the cover on the top, front part of the DK2 headset to make sure that the cable is securely inserted into the 2 ports.
#There are 2 connectors, HMDI and USB, at the end of the cable attached the the headset. Plug the HDMI and USB connectors into the correct ports on your computer. If your computer has only a DVI port instead of HDMI, use the DVI to HDMI adapter.
#Attach the Sync cable and the USB cable to the right side of the Camera (Sync Cable connector on top and microUSB connector on bottom). Connect the other end of the Sync cable to the connector box on the headset cable(where it says Sync Out). Connect the other end of the USB cable to a USB port on your computer.#Place the Camera on a monitor, desk or tripod. The Camera tracks the position of your headset in 3D space. Make sure the lens of the camera Camera is facing you and there is nothing obstructing the line-of-sight between your head and the camera. The camera Camera should be placed from 1.5 to 5 meters away from you.
#
#(Optional) The power adapter is only used to power the USB accessory port on the headset, you don't need it otherwise. Plug the barrel connector of the power cord to the connector box on the headset cable. Attach the power adapter end to an appropriate country's converter then to a power source. '''Make sure you use only the power adapter supplied with your headset.'''
==Apps==
[[VR Apps]] from [[Oculus Share]] and other [[App Stores]]
