8,963
edits
Changes
→Base Stations Setup
'''Using the mounting kits''':
#Mark where you want to install each of the mounts on your wall, and then screw the mounts in. #Rotate the base station to screw it onto the threaded ball joint. Do not screw the base station all the way in, only enough to be stable and oriented correctly.#Tighten the wingnut to the base station to secure it in place.#To adjust the angle of the base station, loosen the clamping ring while carefully holding the base station to prevent it from falling.#Tilt the base station toward the play area.#Connect the power cables to each base station and its power outlet.
'''Update base station firmware''': When SteamVR indicates that base station firmware is out of date, unplug and unmount the base stations. Connect the base stations to the PC with a microUSB cable, one at a time. While pressing the Channel button at the back of the base station, plug in the base station’s power adapter. Update should start automatically once SteamVR detects the base station.
