Changes

Outside-in VR tracking uses cameras or other sensors placed in a stationary location and oriented towards the tracked object (e.g. a headset) that moves freely around a designated area defined by the intersecting visual ranges of the cameras (Figure 1). The object is therefore observed from outside by the fixed tracking device. Usually, the tracked object has a known set of markers that are essential for the calculation of its position relative to the sensors. Also, while this type of positional tracking can be achieved using the visible light spectrum, it is common to use infra-red (IR) markers and cameras that can detect that type of light. <ref name=”1”></ref> <ref name=”2”> Mehling, M. (2006). Implementation of a Low Cost Marker Based Infrared Optical Tracking System. PhD thesis, Fachhochschule Stuttgart</ref> <ref name=”3”> Boger, Y. (2014). Positional tracking: "Outside-in" vs. "Inside-out.” Retrieved from http://vrguy.blogspot.pt/2014/08/positional-tracking-outside-in-vs.html</ref>

Outside-in tracking using markers is a well-developed and researched technology. Indeed, a group of researchers (Pustka et al., 2012) built a positional tracking system of this kind using only unmodified off-the-shelf mobile phones. Also, an early two-camera tracking system was described by Madritsch and Gervautz in 1996, and a system that used synchronized IR cameras, able to distinguish 6D targets, was described by Dorfmüller in 1999. <ref name=”5”> Pustka, D., Hülb, J.P., Willneff, J., Pankratz, F., Huber, M. and Klinker, G. (2012). Optical Outside-In Tracking using Unmodified Mobile Phones. IEEE International Symposium on Mixed and Augmented Reality</ref>