8,963
edits
Changes
→Setup Tutorial
#There are 2 connectors, HMDI and USB, at the end of the cable attached the the headset. Plug the HDMI and USB connectors into the correct ports on your computer. If your computer has only a DVI port instead of HDMI, use the DVI to HDMI adapter.
#Attach the Sync cable and the USB cable to the right side of the Camera (Sync Cable connector is on top and microUSB connector is on bottom). Connect the other end of the Sync cable to the connector box on the headset cable (where it says Sync Out). Connect the other end of the USB cable to a USB port on your computer.
#Place the Camera on a monitor, desk or tripod. The Camera tracks the position of your headset in 3D space. Make sure the lens of the Camera is facing you and there is nothing obstructing the line-of-sight between your head and the camera. The Camera should be placed from about 1.5 to meters or 5 meters feet away from you.
#Adjust the 2 headset straps so the headset fit comfortably in front of your face.
#There are 2 pairs of lenses. The taller lenses (A) are for users with normal and slightly nearsighted visions. The short lenses (B) are for users that are very nearsighted. A Lenses are installed in a new headset. You can switch the lenses with turn and lock-in mechanism. Note that, use A Lenses if you plan to wear glasses or contacts while using the headset.
