Project North Star

Revision as of 04:59, 1 October 2024 by Acro (talk | contribs) (Created page with "thumb '''Project North Star''' is a community-led project for an augmented reality headset that was originally open-sourced by Leap Mot...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 04:59, 1 October 2024 by Acro (talk | contribs) (Created page with "thumb '''Project North Star''' is a community-led project for an augmented reality headset that was originally open-sourced by Leap Mot...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Project North Star is a community-led project for an augmented reality headset that was originally open-sourced by Leap Motion.

It is named "North Star" because it represents the direction that Leap Motion wanted computer-human interaction to go in.

The project north star is based on a reflector style design. It is an optical-see-through head mounted display (OST-HMD).

Project North Star headsets generally use an Intel T265 and a Leap Motion Controller.[1]

A northstar headset uses a curved reflector. The headsets typically require calibration to correct for geometric distortions introduced by the reflector.

There are multiple different versions, including the original release, and the Deck X.[1]

Headsets can be partially 3D printed.

A northstar headset requires a separate computer to run.

Hardware

The original prototype headsets had a large field of view. The first open-source release shrunk it.[2]

The original reference design specified by Leap Motion uses BOE VS035ZSM-NW0 displays.[3]

Versions

  • Release 1 - internal release[4]
  • Release 2 - first public open-source release[4]
  • Release 3[4]
  • Release 3.1[4]
  • Release 3.2[4]
  • Deck X[4]
  • Northstar Next[4]

History

Prototype reflectors were 3D printed using VeroClear resin.[2] A secondary set of reflectors were produced using diamond turning from a block of acrylic material.[2] The secondary set of reflectors were coated with a thin layer of silver.[2]

Software

How to build

A North Star headset can be built by selecting the right displays and driver board.

Calibration is one of the key steps. Calibration can be done with a calibration rig.[1]

Building with support for hand tracking is not recommended.

References